Paving Asphalt 60/70 U
ExxonMobil asphalt , Singapore
PENETRATION GRADED ASPHALT PRODUCT
Product Description
Paving Asphalt 60/70 U is a penetration graded asphalt product derived from specially selected crude oils via carefully controlled refining processes.
The quality of ExxonMobil products is assured for every delivery. They are produced and controlled according to the ExxonMobil Product Quality Management System, EN ISO 9000 or equivalent standard.
Applications
Paving Asphalt 60/70 U is recommended for road construction. If other applications are considered, then users should conduct appropriate testing before use.
Properties & Specifications
Paving Asphalt 60/70 U meets the following specification requirements:
| Asphalt | Unit | Method | 60/70 U |
| Penetration at 25° C | x 0.1 mm | ASTM D 5 | 60-70 |
| Softening Point | °C | ASTM D 36 | 47-56 |
| Ductility at 25° C, 5 cm/min (min) | cm | ASTM D 113 | 150 |
| Wax content (max) | mass % | DIN EN 12606-1 | 2 |
| Specific gravity | - | ASTM D 70 | 1.01-1.05 |
| Flash Point (min) | °C | ASTM D 92 | 232 |
| Solubility in trichloroethylene (min) | mass % | ASTM D 2042 | 99.5 |
Thin Film Oven Test at 163° C (ASTM D1754)
| Change of mass (max) +/- | mass % | ASTM D 1754 | 0.2 |
| Retained penetration, as percentage of original (min) | % | ASTM D 5 | 60 |
| Ductility at 25° C , 5 cm/min (min) | cm | ASTM D 113 | 100 |
Above specifications may be subject to change.
Health & Safety
Detailed health and safety information for this product is provided in the Material Safety Data Sheet (MSDS), available upon request through your local sales representative or from www.ExxonMobil.com
All trademarks used herein are trademarks of Exxon Mobil Corporation or one of its subsidiaries.