PROWAX 660
ExxonMobil specialties , France
Product Description
Prowax 660 is a mid-to-high range melting point product in the Prowax line of petroleum slack and scale waxes. It is a translucent crystalline material in the solid state and an amber-to-brown, clear liquid when molten. It is derived from petroleum via a carefully controlled refining process. Prowax 660 is comprised of a mixture of straight chain normal paraffin and branched, iso-paraffin hydrocarbons.
ExxonMobil waxes are produced and controlled according to the ExxonMobil Product Quality Management System, EN ISO 9000 or equivalent standard.
Applications
Prowax 660 can be used in the following applications subject to applicable laws and regulations in each jurisdiction*:
• Wax emulsions
• Wax isomerisation feedstock
• Wax blends
* User must check compliance with applicable regulations
Properties and Specifications
|
Property |
Standard Method(a) |
Min |
Max |
|
Kinematic Viscosity @ 100 C, mm2/s |
ASTM D445 |
7.0 |
9.0 |
|
Flash Point, Cleveland Open Cup, °C |
ASTM D92 |
220 |
|
|
Congealing Point, °C |
ASTM D938 |
58.0 |
68.0 |
|
Solvent Extractables in Petroleum Waxes, wt% |
ASTM D3235 |
|
30 |
Note 1: Products are certified on release to meet the values specified. Actual values may deviate within the established reproducibility of the test method specified.
Note 2: For purpose of determining conformance with specification, observed or calculated values shall be rounded off to the nearest unit in the last significant digit used in expressing the limiting value in accordance to the ASTM E 29 method
(a) In lieu of standard test method, alternate test methods may be used for the certification of a product property.
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
02-2022