Prowaxx™ 1274 SR
ExxonMobil specialties , Mexico
Product Description
Prowaxx 1274 SR is a low melt point, semi-refined paraffin wax product. It is designed to work as the paraffin component in plant-based candle formulations. The oil content specification is designed to enable good glass adhesion in container candle wax formulations. Compositionally, it is well suited at minimizing syneresis in container candles blends. Prowaxx 1274 SR works well in both pouring and slurry candle manufacturing.
Prowaxx 1274 SR is a translucent crystalline material in the solid state and is water-white, low viscosity, clear liquid when molten. It is produced via a carefully controlled manufacturing process to ensure consistent quality.
Prowaxx 1274 SR meets the requirements for the Food and Drug Administration (FDA) standards for indirect food contact substances and contains an oxidation inhibitor to improve stability.
ExxonMobil waxes are produced and controlled according to the ExxonMobil Product Quality Management System, EN ISO 9000 or equivalent standard.
Features and Benefits
|
Features |
Advantages and Potential Benefits |
|
Optimized oil content |
Improves container glass adhesion |
|
Controlled molecular composition |
Minimal syneresis (oil bleed) Candle manufacturing flexibility (pouring and slurry) |
Applications
Prowaxx 1274 SR is primarily used as a component in the manufacture of container candles subject to applicable laws and regulations in each jurisdiction*.
*User must check compliance with applicable regulations.
Regulations and Claims
|
PROWAXX 1274 SR meets: |
|
FDA 21 CFR 178.3710 |
Properties and Specifications
|
Property |
Standard Method(a) |
Min |
Max |
|
Saybolt Color |
ASTM D156 |
+28 |
|
|
Oil Content, wt% |
ASTM D721 |
5 |
9 |
|
Melting Point, °C |
ASTM D87 |
50.5 |
54.5 |
|
Flash Point, Cleveland Open Cup, °C |
ASTM D92 |
204 |
|
|
Odor, Wax |
ASTM D1833 |
|
1 |
Note 1: Products are certified on release to meet the values specified. Actual values may deviate within the established reproducibility of the test method specified.
Note 2: For purpose of determining conformance with specification, observed or calculated values shall be rounded off to the nearest unit in the last significant digit used in expressing the limiting value in accordance to the ASTM E 29 method
(a) In lieu of standard test method, alternate test methods may be used for the certification of a product property.
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspxAll trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
04-2023