LS 100N DO
ExxonMobil basestocks , United States
Product Description
This specialized base stock by ExxonMobil is specifically intended to be used as diluent oil for additives used for finished lubricant blending. This simplifies our customers' operations because we produce base stocks with consistent quality following our proprietary Product Quality Management System (PQMS) standards. ExxonMobil follows rigorous processes to ensure reliable delivery of consistent quality base stocks so customers can be confident in their base stock supply.
Specifications
Property |
Limit |
Standard Method(a) |
|
Grade |
|
|
N/A |
ASTM Color |
Max |
ASTM D1500 |
1.0 |
Viscosity Index |
Min |
ASTM D2270 |
95 |
Sulfur, mg/kg |
Max |
ASTM D2622 |
100 |
Kinematic Viscosity @ 100 C, mm2/s |
Min-Max |
ASTM D445 |
3.8-4.4 |
Kinematic Viscosity @ 40 C, mm2/s |
Min-Max |
ASTM D445 |
18.5-23.5 |
Cold-Cranking Simulator, Apparent Viscosity @ -25 C, mPa.s |
Max |
ASTM D5293 |
1,750 |
Noack Volatility, Procedure B, mass% |
Max |
ASTM D5800-PROB |
28 |
Flash Point, Cleveland Open Cup, °C |
Min |
ASTM D92 |
190 |
Pour Point, °C |
Max |
ASTM D97 |
-15 |
Appearance |
Min-Max |
Visual |
Clear and Bright |
Note 1: Products are certified on release to meet the values specified. Actual values may deviate within the established reproducibility of the test method specified.
Note 2: For purpose of determining conformance with specification, observed or calculated values shall be rounded off to the nearest unit in the last significant digit used in expressing the limiting value in accordance to the ASTM E 29 method
(a) In lieu of standard test method, alternate test methods may be used for the certification of a product property.
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
12-2024