Mobil ATF™ D/M
Mobil Passenger Vehicle Lube, Canada
Automatic Transmission Fluid
Product Description
Mobil ATF D/M provides the excellent oxidation and friction stability, anti-wear properties, and low-temperature fluidity desired for most automatic transmissions.
Features and Benefits
Advantages and potential benefits offered by Mobil ATF D/M over transmission fluids of lower quality are:
• Excellent oxidation stability — resists chemical deterioration over long service periods.
• High viscosity index — retains adequate lubricating body for severe hot-weather service without thickening excessively at low starting temperatures
• Corrosion prevention — provides protection against rusting and corrosion, plus special protection for soldered fittings
• Foaming resistance — contains an effective anti-foaming agent
• Elastomer compatibility — is not harmful to synthetic rubber seal materials.
• Good lubricating characteristics — give quiet operation, smooth shifting, and excellent wear protection.
• Controlled friction properties — transmission of power is smooth and efficient throughout all normal temperature ranges.
Applications
Mobil ATF D/M is recommended by Imperial Oil for use in:
• 2005 and earlier GM vehicles, where Dexron is specified
• 1988 and newer Ford vehicles requiring MERCON specified fluid
• Allison Powershift transmissions in agriculture applications and other torque converter systems requiring an Allison C-4 or DEXRON III H specified fluid.
Note: Mobil ATF D/M is not recommended for applications requiring MERCON V or Type F ATF
Mobil ATF D/M also can be used as the lubricating oil in several types of rotary air compressors under certain service conditions. Its low-temperature properties and resistance to oxidation are important factors in meeting the requirements of this service. (Please consult the manufacturer service manual for required specs before use).
Good maintenance practice dictates that automatic transmissions be checked for proper fluid levels at regular intervals, and that the fluid be drained and replaced at intervals recommended by the manufacturer. Some manufacturers recommend more frequent changes of transmission fluid under severe driving conditions.
Specifications and Approvals
This product is recommended by Imperial Oil for use in applications requiring: |
Allison C-4 |
Ford MERCON |
GM DEXRON IIIH |
GM DEXRON IIiG |
GMDEXRON IIE |
GM DEXRON IID |
GM DEXRON II |
ZF TE-ML 09 |
Toyota ATF D-III |
Properties and Specifications
Property |
|
ASTM Color, ASTM D1500 |
Red |
Brookfield Viscosity @ -40 C, mPa.s, ASTM D2983 |
17000 |
Density @ 15.6 C, kg/l, ASTM D4052 |
0.850 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
180 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
7.2 |
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
34 |
Viscosity Index, ASTM D2270 |
183 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
05-2024