Mobil 1 ESP 0W40

Mobil Passenger Vehicle Lube, Canada

Advanced Synthetic Engine Oil

Product Description

Mobil 1™ ESP 0W-40 is an advanced synthetic engine oil designed to help provide exceptional cleaning power, wear protection and overall performance. Mobil 1 ESP 0W-40 has been expertly engineered to help prolong the life and maintain the efficiency of emission systems in both diesel and gasoline powered automobiles. Mobil 1 ESP 0W-40 meets or exceeds the requirements of many leading industry and car manufacturers' standards required for newer modern diesel and gasoline powered passenger car engines.

 

Features and Benefits

Mobil 1 ESP 0W-40 is made with a proprietary blend of leading edge components formulated to be fully compatible with the latest Diesel Particulate Filters (DPF's) and Gasoline Catalytic Converters (CAT's). Mobil 1 ESP 0W-40 has been designed to help deliver outstanding performance and protection in conjunction with potential fuel economy benefits. Key features and potential benefits include:

 

Features

Advantages and Potential Benefits

Low Ash Content

Helps to reduce particulate build up in Diesel Particulate Filters

Low Sulphur and Phosphorous content

Helps to reduce poisoning of Gasoline Catalytic Converters

Active cleaning agents

Helps to reduce deposits and sludge build-up to enable long and clean engine life

Outstanding thermal and oxidation stability

Helps to reduce oil aging allowing extended drain interval protection

Low oil consumption

Less hydrocarbon pollution

Enhanced frictional properties

Potentially aids fuel economy

Excellent low temperature capabilities

Quick cold weather starting and ultra fast protection

Helps to extend engine life

 

Applications

Mobil 1 ESP 0W-40 is recommended for all types of modern automobile engines, especially the high-performance gasoline and diesel engines found in the latest passenger cars, SUVs and light vans.

 

Mobil 1 ESP 0W-40 has the General Motors Service Fill dexos2™ approval, which is required for all 2010 new GM/Opel/Vauxhall/Chevrolet Diesel and Gasoline models. GM/Opel have advised that dexos2™ specification is backward compatible to older GM/Opel specifications (GM-LL-A-025 and GM-LL-B-025). The majority of GM/Opel/Vauxhall/Chevrolet Diesel and Gasoline vehicles can use dexos2™ lubricants.

 

Mobil 1 ESP 0W-40 is especially suitable for extreme conditions, where conventional oil often may not perform

 

It is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.

 

Specifications and Approvals

This product has the following builder approvals:

GM dexos2

MB-Approval 229.31

MB-Approval 229.51

 

This product is recommended by ExxonMobil for use in applications requiring:

API CF

GM-LL-A-025

GM-LL-B-025

 

This product meets or exceeds the requirements of:

ACEA C3

API SM

FIAT 9.55535-S2

 

Properties and Specifications

Property

 

Grade

SAE 0W-40

Ash, Sulfated, mass%, ASTM D874

0.8

Density @ 15 C, g/ml, ASTM D4052

0.845

Flash Point, Cleveland Open Cup, °C, ASTM D92

234

Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683

3.76

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

13.2

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

73

Mini-Rotary Viscometer, Apparent Viscosity, -40 C, mPa.s, ASTM D4684

26400

Phosphorus, mass%, ASTM D4951

0.08

Total Base Number, mgKOH/g, ASTM D2896

7.8

Viscosity Index, ASTM D2270

176

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

 

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.


12-2021